Wellcraft St. Tropez

32' Wellcraft St. Tropez Cockpit CoverAfter we fabricated a new cover for this customers neighbor, he called us wanting a new cover as well. This 32′ 1988 Wellcraft St. Tropez needed a new cockpit cover to keep its interior dry!

We do each cover we create custom, which requires us to go out to each boat. We do this because each boat is set up slightly different. Whether it be a minor adjustment to framing or the overall set up of the boat. That way your cover fits your boat like a glove! Our first step is to take 3d measurements of the boat quickly and efficiently. Our 3d measuring device is cost-effective and labor saving, which means it saves us time and you money! After we take measurements we head back to the shop to do design work on the computer making sure that our designer meets all your boating needs when it comes to your new cover. After we finish the design work, we head over to our plotter which is another cost-effective, labor saving tool we have here at Chicago Marine Canvas. After it’s all drawn out, we give everything over to our seamstress and she sews it up.

For this cockpit cover we used Sunbrella fabric in the color dubonnet tweed along with Sunguard polyester thread in black.

We did cut outs for this boats poles that had custom cuffs and velcro flaps to ensure security of the cover onto the boat, as well as preventing water from getting into where the poles are on this boat.

32' Wellcraft St. Tropez Cockpit Cover

We used a boat vent II to ensure airflow so that no mildew or must get stuck inside the boat if the inside ever gets wet!

We also put 2″ black webbing all around the bottom edge of this boat to to reenforce where we placed each one of the snaps. For snaps we used DOT fasteners in burgundy to blend into the cover.

Box Cushions

Today we recreated three box cushions for a customer using Infinity Fabrics Superior Upholstery Vinyl in the color LTH04, which is a brownish tan color. We used Sunguard Oyster UVR bonded polyester thread which is great to use img_20161212_090038600on things that are going to be exposed to a lot of sunlight and weather of all kinds. Sunguard is twisted and bonded in a certain way that the thread will have the best quality colorfastness and performance when in use. It is an anti-wick thread which helps reduce seam leakage. Its a great strong thread to use on cushions that are going to be outdoors when you are on your boat!
Using our 3D measuring device, we took measurements of the old cushions to assure that these new ones would fit the right dimensions. Then we took those measurements to the computer and used CAD to finish up the design process to make sure everything was perfect.
img_20161212_153705131_hdrAfter that we draw the pattern out onto the fabric with our plotting machine and then we hand cut the fabric.
The first step for sewing these together is sewing the zipper part of the cushion.
For these cushions we did hidden zippers, along with the end of the zipper being able to get tucked into theimg_20161212_153816834 cushion so the zipper head isn’t going to be seen! After that we finish up the whole rest of the side piece that wraps around the cushion. Then we attach the top and bottom to the piece, and take our time sewing the seam down or up, depending on how the customer wants the cushion to look, most of the time we use a double needle
img_20161212_153719586machine to give the cushion a nice finished look. For these, we just sewed the seam up to the top and bottom of the cushion, so if any water were to get on the seats, it img_20161212_153756481would roll over the edge, instead of getting stuck in the seam!