sunpad Archives | Page 3 of 3 | Chicago Marine Canvas

September 15, 2017May 2, 2019

Full Enclosure & Sunpad

For this Sea Ray 500, the bridge was constricting the captain, so we raised the framing 6 inches for more headroom.

We also made a new aft frame for this boat so that the customers could have more shade with their new enclosure. We brought the pole out further towards the back of the boat, so that the bimini could be wider then their last cover.

After we did some adjustments on their framing, we went and took measurements with our 3d measuring device. Then our designer went back to the shop and started working his magic designing a custom enclosure.

Sea Ray 500 Custom Full Enclosure AFT View (Strataglass Roll Ups)

For this project we used Sunbrella fabric in Captains Navy, GORE tenara thread in black, Lenzip zippers. Both GORE tenara thread and Lenzip zippers have a lifetime warranty. That means they are guaranteed to last longer then your canvas and that the sun and water will not eat away at them!

For the forward windows we used Makrolon, which is made out of a polycarbanate that makes these windows semi-rigid! For the aft windows we used Strataglass. We did roll ups for some of the back windows for air flow when the cover is up. To ensure no water leakage in the roll up windows we used Lenzip’s waterproof chain zipper.

Sea Ray 500 Custom Sunpad

We also designed and sewed up four separate custom sunpads for this boat. We used Captains Navy Sunbrella upholstery fabric to match the new closure we created for them! These cushions have an Oyster Sunbrella piping around the edges to help create the illusion that these are all one long cushion! They also have two easily removable headrests that have pockets in the back of them for storage so that things don’t go flying away when you are out and about. They are attached to the boat with custom velcro straps that wrap around poles located down each side of the center of the boat. These cushions aren’t going anywhere but where the boat takes them!

Sea Ray 500 Custom Sunpad Detail Of Head Rest

They are made out of active foams dryfast foam. Dryfast foam is an open-cell foam that allows water to go through the foam instead of absorbing it like other foams. These cushions will get dry way quicker if they get wet out on the water or soaked after a rain storm. They also have a white screen on their underside to also help with water drainage along with a large horse shoe shaped zipper for easy removal if the customer wants to throw these in the wash at the end of the year.

January 5, 2017December 4, 2023

Sun Pad

Recently a customer reached out to us about wanting a new sunpad. His was covered in dirt, debris, and mold from being out on his boat for so many years.
He decided he wanted the same exact look as his old ones, and even wanted to keep the old foam. Some of his foam was moldy, so we had to use a mixture of 50/50 bleach and water to spray the foam down to make it safe to use again.
After we prepped the old foam, we got measurements using our 3d measuring device to start the design process for the cushions.
After that we started sewing the new cushion covers together. These cushions are created out of Infinity Fabric Superior Upholstery Vinyl!
The bottoms of these cushions are all screen with an U shaped zipper to help easily remove the big piece of foam for easy access. The screen also helps with water drainage to help allow the cushion to have some breathing room which will help prevent mold in the near future.
We also added straps along with DOT Twist Lock fasteners to the cushions so they can be secured to the boat so they won’t go flying anywhere when you are on the move!

November 14, 2016December 4, 2023

40′ Sea Ray EC

This 40′ Sea Ray EC came to us with multiple jobs. First we started off designing a bow cover for their sunpad. We took our portable 3D
measuring device out to the dock and took our measurements to start the design process. Then when we got back to the shop we designed the cover using CAD. The customer chose Black Sunbrella fabric for this cover. We used GORE Tenara thread in black which has a life time guarantee, along with silver DOT snaps to secure the cover to the boat. Our next job on the boat was creating a cockpit cover for the boat. We also did this in Black Sunbrella fabric using black DOT snaps. We used a Boat Vent II pole holder to help create air flow while the cover is up, and to help water roll off the cover instead of pooling in the center! After both of these covers were competed we reupholstered the boats Garmin cover using a Black Infinity woven vinyl. Then we moved onto reupholstering all the outdoor seating. We did this by fabricating new foam pieces for the bottom and back of the seating. After that we sewed up the new seat covers for the foam using Infinity woven vinyl in carbon fiber, which has a funky pattern to it, and then the fabric style leatherette. These two styles were the same color, but had different textures, bringing some contrast to the new seats! For these seats we also used our double needle machine to add another nice finishing touch for the stitch work!