Tag: weatherproof

Posted on

Double Sunpads – Sea Ray Sundancer 420

On this 2005 Sea Ray Sundancer 420 we made double sunpads using Cabana Classic Sunbrella upholstery fabric.

Sunbrella fabrics are highly durable and resistant to abrasions, weather, mold and mildew. And all Sunbrella fabrics come with a 5-year warranty.

Check out our page here to learn more about how to keep your fabric looking new and the cleaning process. 

These sun pads have built in headrests help with max comfort while relaxing. Sunpads are made with 3″ tampered foam, whereas the head rests are elevated to 6″.

Cup holders and pockets were added onto the headrest to keep valuables in place when relaxing.

It was also made with Dri-Fast Foam that causes it to dry very fast. Since Drifast foam is a firm open celled foam that is very porous, it allows water to run through it easily, instead of absorbing it like other closed cell foams.

Posted on

Exterior Upholstery

For this Sea Ray Sundancer we did a full boat of exterior upholstery. The cushions and chairs were made using Polari sand Dollar and Beluga Mocha fabrics. Along with ActiveFoam Vinyl. 

A diamond pattern can be found throughout the pieces to add extra details. 

Chicago Marine Canvas uses the best upholstery fabrics, vinyls and faux leathers. Which are all certified for marine use. All fabrics are not only comfortable but also highly durable.

The customer wanted Sea Ray embroidered onto different pieces. Since embroidery is fully custom, any words or logos can be embroidered. 

Posted on

Rigid Enclosure

For this Searay Sundancer we made a rigid enclosure using Tuffak (Markolon) polycarbonate material for the windows. This material does not shrink or stretch in the sun, which keeps it looking as good a new for years. 

We used SolarFix thread for these windows. SolarFix is a PTFE (PolyTetraFlouroEthylene) thread because of what it is made out of it has a lifetime guarantee. It is UV resistant and resistant to chemicals too, so this means that this customer will never need any re-stitching repairs. For zippers we used Lenzip plastic molded zippers which also have a lifetime guarantee on them.

Posted on

Dingy Cover For Galeon 560 Skydeck

Dingy CoverThis 2017 Galeon 560 Yacht  needed a new dingy cover.

Here at Chicago Marine Canvas we specialize in custom covers therefore, none of our covers are the same. They are all different to ensure that each one fits the boat in need properly. We also use many labor-saving tools that help us do things quickly. This saves you money at the end of the day on the perfect cover.

Dingy CoverThe first step to our process is to head out to your boat to take measurements with our 3D measuring device. After we gather precise measurements we head back to the shop to start our design process on the computer. We do all of our design work using CAD (Computer-Aided-Design) Software. Because we are working on the computer we can see exactly what we are creating in 3D. This allows us to create the perfect fitting cover for your boat. After the cover is designed, we draw it out using our plotter. This draws out all the pieces of the pattern perfectly so our seamstress can sew it up!

Dingy CoverThis dingy cover was created out of Stamoid. Stamoid is a great material to make a boat cover out of. It is water, UV, and stain resistant. We used SolarFix thread in clear to sew this all together. Solarfix is a PTF thread which is also, UV, chemical, and mildew resistant. Which means, that you’d never have to bring your new dingy cover in for restitching after it’s been out in the sun for a few summers! Finally, on the bottom of the cover we did a draw cord. As a result, the cover can tighten around the dingy keeping the cover nice and secure, and your boat dry!

Posted on

Outdoor Kitchen Cover

Custom Outdoor Kitchen Cover Chicago Marine CanvasWhen it comes to custom outdoor kitchen areas, we are the right company to call. Why? Because we only create custom covers, meaning we can basically make whatever you want! For this outdoor kitchen area we created a custom slip cover.

Our process starts out by us traveling out to your home to take measurements with our 3d measuring device. Here at Chicago Marine Canvas we use lots of labor-saving, cost-effective tools that save us time, and you money.

After we gather the measurements, we head back to our shop and we start the design process. Here we make sure to accommodate to any needs while making sure to execute the right design for your outdoor area.

Custom Outdoor Kitchen Cover Chicago Marine CanvasOnce our design process is all done, we draw out all the pieces of your new cover using our plotter, which is another one of our labor-saving, cost-effective tools that we use here in the shop. After that, our seamstress cuts everything out, and starts sewing it all together.

For this outdoor cover we used SeaMark fabric in Navy. SeaMark fabric is a combination of a woven acrylic facing with a textured marine grade vinyl backing on the inside. SeaMark is extremely colorfast, fade resistant, and durable because of its vinyl backing. The strength of this fabric allows it to withstand the toughest conditions, even the winds here in the windy city! It is salt, moisture, sun, wind, and temperature resistant. SeaMark fabric has a 5 year warranty.

Custom Outdoor Kitchen Cover Chicago Marine CanvasWe used SolarFix thread in black to sew up this cover. SolarFix is a 100 percent PTFE (PolyTetraFlouroEthylene) fiber. It has a lifetime warranty, meaning no more restitching repairs once your cover has been out in the elements for a few years. This will save you time, and money in the end!

Along the bottom edge of this cover we added 1 1/2 inch webbing for durability to ensure that the fasteners we attached to this cover, wouldn’t rip through the fabric in high winds.

Custom Outdoor Kitchen Cover Chicago Marine CanvasIn the back area, and on the side we added 2 Lenzip zippers. Lenzip has a lifetime guarantee as well. We added these two zippers into the design to help ensure that the customer will get their cover on and off with ease.

So if you have a different outdoor area, that you can’t seem to find a cover for, give us a call and well help keep your investment clean and dry all year round!

 

 

Posted on

42′ Silverton – Flybridge Enclosure

For this 42′ Silverton we created a full enclosure for the flybridge. Using flybridge-silverton Silica Charcoal Sunbrella fabric and Strataglass, designed a enclosure with maximum visibility for these boaters. We used GORE Tenara thread and Lenzip zippers, both of these are guaranteed to last for life!

We created three forward windows, and three aft windows. All three forward windows have roll ups, along with both port and star windows, and the flybridge-silverton-2middle aft. This is to help create airflow while the cover is up!

Posted on

42′ Navigator – Full Enclosure

img_20161027_122758715For this 42′ Navigator we designed a full enclosure with maximum visibility.

For this boat cover the customers went with Stamoid fabric in white. Stamoid is a material coated in vinyl and is very easy for cleaning. These boaters wanted to use Makrolon for their Forward windows. Makrolon is an a polycarbonate which is clear likeimg_20161101_132818912 glass material that is harder then other marine materials commonly used for windows. With Makrolon your windows wont bend and wont wrinkle, and wont scratch.  For their side and aft windows, the customer went with Strataglass, that way they could have roll ups for easy access to air flow while the enclosure is still up! img_20161101_133206656We created these roll ups with screens to helpimg_20161101_132926078 prevent any unwanted bugs from getting onto the boat. The forward  windows attached to the bimini using Lenzip zippers, using GORE Tenara thread, both of these products are guaranteed to last a life time. The aft windows are attached to the radar arch using kedar and water proof seal to ensure no leakage into the boat. We also created a windshield cover for this boat to help keep the heat off the inside, and the windshield clean when no ones on the boat! This cover turned out great and looks super sharp on this 42′ Navigator!