Aft Cover

For this Sea Ray we made a Forest Green aft cover using Sunbrella fabric and SolarFix thread.

Aft Covers are one of the most common types of boat covers in Chicago. You’ll see them a lot due to the overwhelming amount of cruiser style boats in the harbor. 

Aft Covers can be all canvas, have an eisenglass window in the back or be entirely made from eisenglass. But the last style is more common on complete enclosures. They are attached to other canvas panels and/or a radar arch with zippers and then to the boat by snaps.

Double Sunpads – Sea Ray Sundancer 40

These double sun pads were made for a 2004 Sea Ray Sundancer 40 using Sunbrella’s Adaptation Indigo fabric. Which comes with a 5-year warranty.

It was also made with Dri-Fast Foam that causes it to dry very fast. Since Drifast foam is a firm open celled foam that is very porous, it allows water to run through it easily, instead of absorbing it like other closed cell foams.

Having double sunpads instead of one giant one makes it easy to move and store. Since the sunpads are fully customizable, we have had customers make one, two, and three for this type of boat. 

These sun pads have built in headrests help with max comfort while relaxing. Sunpads are made with 3″ tampered foam, whereas the head rests are elevated to 6″.

It has integrated pockets and cup holders in the headrest to hold drinks, phones, and other valuables. No more having to worry about your phone sliding into the water while you’re relaxing.

Dingy Cover For Galeon 560 Skydeck

Dingy CoverThis 2017 Galeon 560 Yacht  needed a new dingy cover.

Here at Chicago Marine Canvas we specialize in custom covers therefore, none of our covers are the same. They are all different to ensure that each one fits the boat in need properly. We also use many labor-saving tools that help us do things quickly. This saves you money at the end of the day on the perfect cover.

Dingy CoverThe first step to our process is to head out to your boat to take measurements with our 3D measuring device. After we gather precise measurements we head back to the shop to start our design process on the computer. We do all of our design work using CAD (Computer-Aided-Design) Software. Because we are working on the computer we can see exactly what we are creating in 3D. This allows us to create the perfect fitting cover for your boat. After the cover is designed, we draw it out using our plotter. This draws out all the pieces of the pattern perfectly so our seamstress can sew it up!

Dingy CoverThis dingy cover was created out of Stamoid. Stamoid is a great material to make a boat cover out of. It is water, UV, and stain resistant. We used SolarFix thread in clear to sew this all together. Solarfix is a PTF thread which is also, UV, chemical, and mildew resistant. Which means, that you’d never have to bring your new dingy cover in for restitching after it’s been out in the sun for a few summers! Finally, on the bottom of the cover we did a draw cord. As a result, the cover can tighten around the dingy keeping the cover nice and secure, and your boat dry!

Sailboat: Dodger, Helm Cover, Winch Covers, Sail Cover

Custom Sailboat Dodger, Sail Cover, Helm Cover, Winch CoversFor this sailboat we created a custom dodger, helm cover, winch covers and sail cover.

Here at Chicago Marine Canvas, everything we do is custom. We use many cost-effective, labor-saving tools that help us speed up the process, therefore you save some money. This also helps us make sure that your cover will fit perfectly when it comes to install time!

The first thing we do to begin our process is journey out to your boat. Once we get Custom Sailboat Dodger, Sail Cover, Helm Cover, Winch Coversthere we use our 3D measuring device to take precise pinpoint measurements. After we gather all of those, we head back to our shop where our designer gets to work. We use CAD (Computer-Aided-Design) Software during our design process. On the computer we can see the thing we can see the design in 3D.Custom Sailboat Dodger, Sail Cover, Helm Cover, Winch Covers

Making sure everything matched in color, we used Sunbrella fabric in the color toast. Sunbrella is one of our favorite marine fabrics to use when it comes to canvas, it comes with 10 year warranty. For all the things we sewed up for this job, we used  SolarFix thread in clear, which has a lifetime guarantee. This means, no more restitching after your new canvas has been out in the sun for a few years! This thread will outlast the canvas it self!

We made sure to add leather reinforcement patches on the forward and aft areas of the dodger where Custom Sailboat Dodger, Sail Cover, Helm Cover, Winch Coversthere would be high amounts of friction on the sailboat. For the windows of this dodger we used Strataglass. Strataglass is the only vinyl on the market that offers a 2 year warranty if it is properly maintained and cleaned.

For this sailboat we also made matching winch covers out of sunbrella fabric as well as a matching helm cover!