sunpads Archives | Chicago Marine Canvas

July 15, 2022November 30, 2023

Double Sunpads – Sea Ray Sundancer 40

These double sun pads were made for a 2004 Sea Ray Sundancer 40 using Sunbrella’s Adaptation Indigo fabric. Which comes with a 5-year warranty.

It was also made with Dri-Fast Foam that causes it to dry very fast. Since Drifast foam is a firm open celled foam that is very porous, it allows water to run through it easily, instead of absorbing it like other closed cell foams.

Having double sunpads instead of one giant one makes it easy to move and store. Since the sunpads are fully customizable, we have had customers make one, two, and three for this type of boat.

These sun pads have built in headrests help with max comfort while relaxing. Sunpads are made with 3″ tampered foam, whereas the head rests are elevated to 6″.

It has integrated pockets and cup holders in the headrest to hold drinks, phones, and other valuables. No more having to worry about your phone sliding into the water while you’re relaxing.

August 17, 2018December 4, 2023

Reclining Dual Sunpads

We created some custom reclining dual sunpads we created for this Cruisers Yacht 390 SC just in time for the Chicago Air and Water Show!!! The Chicago Air and Water Show is the largest free show, of its kind in the country! It happens right on and above Lake Michigan at North Ave. Beach.

Here at Chicago Marine Canvas, we can create anything quickly and efficiently many of our labor-saving tools. We start off all of our projects by going on site to take pinpoint measurements with our 3D measuring device. After we gather the measurements, we head back to our shop and start our design process. We do all of our design work using CAD (Computer-Aided-Design) Software. This allows us to visually see the piece on hand, before we start to psychically put it together. For these sunpads, the customers wanted something that could lay completely flat, as well as sit up to watch the show in front of them.

For these sunpads we used Sunbrella upholstery fabric in Adaptation Indigo. Sunbrella upholstery fabrics come with a 5 year limited warranty and is super easy to clean! upholstery fabric is easy to clean! You can brush off any loose debris before it becomes embedded into the fabric. If you spill anything on the fabric, you can spot clean it before stains set by blotting the spill with a dry cloth. For more information on how to clean up other spills click this link! The bottom layer of these sunpads are fabricated out of a white screen that helps with water drainage. So when it rains, your sunpads wont stay wet, the water will drain out of the bottom easily!

We also used Drifast foam for these two sunpads. Drifast is a open celled foam that allows water to flow through it instead of absorbing it. So if it rains, these cushions will dry out faster then others with different foam. To ensure that your sunpads wont go flying off your boat when cruising on Lake Michigan we attached a kedar track to the front and sides of these sunpads.

These two sunpads can lay completely flat, and recline up into three different positions. If you have a flat deck where your sunpad would sit, these recliners can be custom made for your boat.

July 5, 2018December 4, 2023

Custom Quad Sunpads

This SeaRay Sedan Bridge 390 had lots of deck space so we went a head and designed four custom sunpads to fit the bow of the boat.

Here at Chicago Marine Canvas, everything we do is custom! So we can make anything you have in mind when it comes to design and functionality. Did your last sunpad get taken away by the Chicago winds!? We can make sure your new sunpad is securely attached to your boat so you wont have to worry about it being gone when you come back to your boat! Is your sunpad looking drab? We have access to lots of fun patterns that can make your boat look chic out on the water this year.

The first step to our process is going out to your boat to take measurements. Here at Chicago Marine Canvas we use a lot of labor-saving, cost-effective tools. Our 3D measuring device is one of those tools! We quickly measure your boat and then head back to the shop to start our design process. We do all of our design work on the computer using CAD (Computer-Aided-Design) software. Once we finish that up, we send everything over to our plotter, another one of our cost-effective, labor-saving tools. Our plotter draws out the pattern of your new sunpads perfectly!

For these sunpads we used Sunbrella upholstery fabric in the pattern Adaptation Stone! We can make sunpads out of any material you’d prefer, but we recommend using Sunbrellla upholstery fabric because it’s softer on your skin, easy to clean in a washing machine, and has many different designs and colors available! Sunbrella upholstery fabric comes with a 5 year warranty. For thread we used Solar Fix which is a PTFE or a Polytetrafluoroethylene type of thread, which is also known as teflon, that is guaranteed for life! That means you can say goodbye to repairs that involve restitching. This thread doesn’t get eaten by the sunlight, salt water, or other outside elements.

We used DriFast foam for these sunpads. Drifast foam is a firm open celled foam that is very porous. It allows water to run through it easily, instead of absorbing it like other closed cell foams. It even keeps you cool when you are on it due to the open cells of the foam allowing air to move freely through the foam. This foam is antimicrobial which helps prevent microorganism growth which happens in wet areas.