boat Archives | Page 4 of 5 | Chicago Marine Canvas

July 5, 2018December 4, 2023

Custom Quad Sunpads

This SeaRay Sedan Bridge 390 had lots of deck space so we went a head and designed four custom sunpads to fit the bow of the boat.

Here at Chicago Marine Canvas, everything we do is custom! So we can make anything you have in mind when it comes to design and functionality. Did your last sunpad get taken away by the Chicago winds!? We can make sure your new sunpad is securely attached to your boat so you wont have to worry about it being gone when you come back to your boat! Is your sunpad looking drab? We have access to lots of fun patterns that can make your boat look chic out on the water this year.

The first step to our process is going out to your boat to take measurements. Here at Chicago Marine Canvas we use a lot of labor-saving, cost-effective tools. Our 3D measuring device is one of those tools! We quickly measure your boat and then head back to the shop to start our design process. We do all of our design work on the computer using CAD (Computer-Aided-Design) software. Once we finish that up, we send everything over to our plotter, another one of our cost-effective, labor-saving tools. Our plotter draws out the pattern of your new sunpads perfectly!

For these sunpads we used Sunbrella upholstery fabric in the pattern Adaptation Stone! We can make sunpads out of any material you’d prefer, but we recommend using Sunbrellla upholstery fabric because it’s softer on your skin, easy to clean in a washing machine, and has many different designs and colors available! Sunbrella upholstery fabric comes with a 5 year warranty. For thread we used Solar Fix which is a PTFE or a Polytetrafluoroethylene type of thread, which is also known as teflon, that is guaranteed for life! That means you can say goodbye to repairs that involve restitching. This thread doesn’t get eaten by the sunlight, salt water, or other outside elements.

We used DriFast foam for these sunpads. Drifast foam is a firm open celled foam that is very porous. It allows water to run through it easily, instead of absorbing it like other closed cell foams. It even keeps you cool when you are on it due to the open cells of the foam allowing air to move freely through the foam. This foam is antimicrobial which helps prevent microorganism growth which happens in wet areas.

November 1, 2017December 4, 2023

Donzi 3250 LXC Cockpit Cover

This Donzi 3250 LXC was in need of a new cockpit cover so they gave us a call! We start out all of our jobs by first going out to your boat take measurements so we can begin our process. Here at our shop we use a lot of labor-saving, cost-effective tools. When we go out to take measurements we use our 3d measuring device to digitally map out your boat. Since all boats are slightly different because of framing and other attachments, this makes it quick, and easy for us to gather our measurements as well as map out the small differences that makes your boat slightly unique then another one.

After we gather all of our measurements from your boat, we head back to the shop to start our design process. When we get to this point we upload our measurements we just gathered into our CAD software program and start making the perfect custom cover for you! After our designer finishes your custom cover, we send it over to our plotter which draws it out for our seamstress, saving us time and you money! Then we cut out your new cover and our seamstress starts sewing it up.
For this cockpit cover we used Sunbrella fabric in black. Sunbrella is fade resistant and has a 10 year warranty. We used GORE Tenara thread in black to sew this cover up. GORE Tenara has a lifetime guarantee, which means that this thread will outlast your canvas! No more sun-eaten threads on your new cover, which means no more restitching or repairs!!! Then we used a Boat Vent II to help hold the cover up to prevent pooling, as well as bring some air flow into the boat when the cover is up, to prevent mold and mildew if the interior ever gets wet!

October 12, 2017December 4, 2023

Rinker Fiesta Vee 270

To protect the interior of your boat, it is important to have a waterproof cover. Here at Chicago Marine Canvas we do custom covers for every boat, because every boat is different and we want your cover to fit tight so there is no room for water leaks when a rain storm comes. This is a Rinker Fiesta Vee 270 and we fabricated a custom cover for it this summer.

We start off our process by going out on site to the boat to take measurements. Here at Chicago Marine Canvas we have a lot of cost-effective, labor-saving tools that help cut your covers cost down while making sure it is the perfect fit! For measuring we use a portable 3d measuring device. After we gather all the measurements needed we head back to the shop to start the design process. For this cover our designer made sure to make cut outs for all the framing on this boat, leaving it up to our seamstress to make individual boots for each pole, along with velcro straps to assure the cover isn’t going anywhere in these Chicago winds. After we do all of our design work we head over to our plotter which draws out all of the pieces of your cover we just finished up. This is another one of our labor-saving tools. Our plotter can quickly draw out all of our patterned pieces for your new cover, instead of us having to do it all by hand! After everything is drawn out, we hand it all over to our seamstress so she can begin her process. She starts off by cutting everything out and then looking at the pattern to figure out the best way to sew everything together. After that, she organizes all the pieces and gets to work.

For this cover we used Sunbrella fabric in the color doubonette tweed. We love using Sunbrella fabric! It is fade resistant and has a 10 year warranty! To sew everything together we used GORE tenara thread in black. GORE tenara is another favorite product of ours. It is UV, salt water, chemical and extreme weather resistant! It has a lifetime guarantee, which means, all of your seams will outlast your canvas! We also installed a Boat Vent II in the middle of this cover so that all water that hits it, runs off!

We used DOT snaps in burgundy to blend into this cover, as well as stay puts all along the back.

October 10, 2017December 4, 2023

70′ Hatteras

Visiting Chicago from Florida for the summer. This 70′ Hatteras lost its bimini somewhere from Traverse City to Chicago. We got to create a custom bimini for this boat to help bring the shade back into these boaters lives!

Our first step when we get a job is going on site to take measurements. We bring our 3d measuring device which is labor-saving and cost-effective. It saves us time measuring which saves you money at the end of the day on your new custom cover. After we gather all of our measurements we need and take lots of detailed photos we head back to the shop. We do all of our design work on the computer so we can physically see what we are creating, as well as be super accurate. This helps save us trips when we go to fit the new cover onto your boat. After we do all the design work we then bring it over to our plotter. This is another one of our tools that is labor-saving. Instead of us hand drawing out all of our designs, our plotter does it for us, quickly and efficiently. Then we hand all of our plotted fabric over to our seamstress, who cuts everything out and then starts the fabrication process.

For this 70′ Hatteras bimini cover we used Stamoid fabric in white. Stamoid is UV, water, and fold resistant. It’s very easy to clean with just water! Check out this video to see Stamoids performance testing videos! To sew this up we used GORE tenara thread in clear. GORE tenara UV, saltwater, chemical, and extreme weather resistant. It is backed by a lifetime guarantee. We used lenzip zippers which also have a lifetime guarantee.

We installed this cover on the day the Cubs won the world series! Go Cubs GO!

October 9, 2017December 4, 2023

Carver Flybridge

This summer at Chicago Yacht Works we designed a new flybridge enclosure for this 2000 Carver 530 Voyager Pilothouse. We love working with Chicago Yacht Works because we can work on the boats all year

Since all boats are sightly different, we do only custom enclosures. Everyone has different framing, and other minor add ons. No boat is the same to us! The first step of our process is heading out to the boat with our 3d measuring device. It is cost-effective and labor-saving because it saves us time taking measurements and saves you money in the end. After we take measurements we head back to the shop to start doing design work on the computer. Our designer makes sure to meet all of your boats needs. Then we head the design over to the plotting machine which is another cost-effective, labor-saving device. The plotter draws out all the pieces of your new enclosure instead of us having to draw it out by hand. Then we hand everything over to our seamstress who cuts everything out, and then sews it all together.

For this cover we used linen tweed sunbrella fabric, GORE tenara thread in clear. Sunbrella is a fade resistant canvas we use on most of our covers, and it comes with a 10 year warranty. GORE tenara thread has a lifetime warranty.

The forward windows of this enclosure we used makrolon, which is a semi-rigid polycarbonate. It’s great of how clean it makes your new cover look. There is no sagging with makrolon, and no stretching and shrinking of glass, which is a issue here in Chicago due to the extreme hot summers and the extreme cold winters. For the Aft panels we used strataglass. Strataglass is the only vinyl on the market that comes with a two year warranty after install.

We used Lenzip zippers on this enclosure which also has a lifetime guarantee. We even used their waterproof zipper for the roll up on the port and star side of the enclosure to ensure air flow while the enclosure is up!

September 19, 2017December 4, 2023

Wellcraft St. Tropez

After we fabricated a new cover for this customers neighbor, he called us wanting a new cover as well. This 32′ 1988 Wellcraft St. Tropez needed a new cockpit cover to keep its interior dry!

We do each cover we create custom, which requires us to go out to each boat. We do this because each boat is set up slightly different. Whether it be a minor adjustment to framing or the overall set up of the boat. That way your cover fits your boat like a glove! Our first step is to take 3d measurements of the boat quickly and efficiently. Our 3d measuring device is cost-effective and labor saving, which means it saves us time and you money! After we take measurements we head back to the shop to do design work on the computer making sure that our designer meets all your boating needs when it comes to your new cover. After we finish the design work, we head over to our plotter which is another cost-effective, labor saving tool we have here at Chicago Marine Canvas. After it’s all drawn out, we give everything over to our seamstress and she sews it up.

For this cockpit cover we used Sunbrella fabric in the color dubonnet tweed along with Sunguard polyester thread in black.

We did cut outs for this boats poles that had custom cuffs and velcro flaps to ensure security of the cover onto the boat, as well as preventing water from getting into where the poles are on this boat.

32' Wellcraft St. Tropez Cockpit Cover

We used a boat vent II to ensure airflow so that no mildew or must get stuck inside the boat if the inside ever gets wet!

We also put 2″ black webbing all around the bottom edge of this boat to to reenforce where we placed each one of the snaps. For snaps we used DOT fasteners in burgundy to blend into the cover.

November 18, 2016December 4, 2023

48′ Fairlane Phantom – Flybridge Cover

This 48′ Fairlane Phantom needed a marine cover for its flybridge.

We created this boat cover using Marine Blue Sunbrella fabric. We also used Black GORE Tenara thread, Lenzip Zippers both of these products have a life time guarantee. We used Boat Vent II to prevent water pooling on the cover, and to add airflow while the cover is up. There is interior access with a zipper for this cover so if you are up on the flybridge, you can easily remove it!

November 18, 2016December 4, 2023

56′ Carver – Flybridge Cover

56′ Carver was in need of a boat cover for its flybridge.

Using Charcoal Tweed Sunbrella fabric and GORE Tenara thread we designed a unique cover for this flybridge. Using two Boat Vent II pole holders, to help prevent pooling of water on the cover, as well as create air flow throughout the flybridge while the cover is up.

November 18, 2016December 4, 2023

46′ Sea Ray – Full Enclosure

46′ Sea Ray was in need of a full enclosure.

For this cover we used Black Sunbrella Supreme with Black Flocking on the inside of the fabric. This fabric is water proof and very soft on the inside. We used GORE Tenara thread, and Lenzip zippers. Both of these things come with a lifetime warranty. For the forward windows we used Makrolon. Makrolon is a polycarbonate that is clear like glass, and is softer then real glass, and more firm them Strataglass. For the Aft windows we used Strataglass.

This cover turned out great and makes this boat look super sharp!

November 17, 2016December 4, 2023

42′ Silverton – Flybridge Enclosure

For this 42′ Silverton we created a full enclosure for the flybridge. Using Silica Charcoal Sunbrella fabric and Strataglass, designed a enclosure with maximum visibility for these boaters. We used GORE Tenara thread and Lenzip zippers, both of these are guaranteed to last for life!

We created three forward windows, and three aft windows. All three forward windows have roll ups, along with both port and star windows, and the middle aft. This is to help create airflow while the cover is up!