boating Archives | Page 3 of 5 | Chicago Marine Canvas

May 19, 2022December 4, 2023

Custom Sunpads / Bow Pads Features

The Sunpads are made with a Dri-Fast foam, that causes it to dry very fast. Since Drifast foam is a firm open celled foam that is very porous, it allows water to run through it easily, instead of absorbing it like other closed cell foams. After a hard morning rain, Sunpads will be dried out by the afternoon which means no more soggy Sunpads!

Nothing is better than built in pockets, which is why Custom Sunpads have pockets along the sides to hold your valuables. No more having to worry about your phone sliding into the water while you’re relaxing.

Built in headrests help with max comfort while relaxing on Sunpads. Sunpads are made with 3″ tampered foam, whereas the head rests are elevated to 6″. We also have custom foam cutting which is able to level the pads on a convex bow.

The Sunpads are made with a high-quality fabric from Sunbrella. When using a fabric with a pattern, fabric pattern matching is done to keep the Sunpad’s design visually aligned and flowing at the seams and edges. Little details like this are important to ensure that the product is not only high quality, but visually appealing. The image pictured shows our commonly made Sunpads. But we are able to make all different types which are featured on our Bow Pads page.

We all know that Chicago is known for being windy, that’s why we make sure that the Sunpads are securely attached to the boats.

May 19, 2022November 21, 2023

Benefits on Non-Slip Fabrics for Marine Use

Non-Slip Custom Embroidered Boarding Mat

Chicago Marine Canvas offers one-of-a-kind fiberglass friendly non-slip fabrics which can be used on anything, you name it! There are many projects that can be done using non-slip fabrics. Such as non-slip custom embroidered boarding mats and non-slip cushion bottoms.

Non-slip fabrics are easy to put into place and remove. Which is perfect for a quick and temporary reusable solution. Or to move and use throughout the boat over time. Since there is no drilling into the fiberglass, the non-slip material can be placed on any surface with ease and no leftover damage.

Non-slip materials also help keep your boat clean when guest board your luxury yacht. Boarding mats can be placed down moments before a guest boards and be easily cleaned at the end of the day. Like the name states, the non-slip mats will keep people from slipping while keeping the boat nice and clean.

Any project, such as the boarding mat, can be embroidered with a personal custom design using our embroidering machine. Which adds a personal branded touch to any boat.

January 18, 2019November 21, 2023

Chicago Marine Canvas Wins Twin 2019 Outstanding Achievement Awards

58′ Bayliner Pilothouse – Canvas Enclosure

(Long Beach, CA – Jan. 12, 2019) – Chicago Marine Canvas was recognized with the 2019 Fabrication Excellence Awards for design excellence in marine fabric applications, that took place Jan. 12^th at the 2019 Marine Fabricators Conference, at the Queen Mary in Long Beach, CA.

Chicago Marine Canvas received two Awards of Excellence. The first for it’s The Labor Day Weekend Show project which was recognized in the competition’s soft enclosures category. The second for A “Skater” with Style in the exterior upholstery category.

MFA received a total of 90 entries submitted in 9 categories in this year’s competition. Winners were selected based on complexity, design, workmanship, uniqueness and function. Judges were certified Master Fabric Craftsman professionals who were chosen for their knowledge in a particular product area.

28' Skater Boat - Captain Chair — 28′ Skater Boat – Captain Chair

All entries receive prominent recognition at the Marine Fabricators Conference. Entrants receive additional publicity through coverage in the Marine Fabricator and winners not only receive additional coverage in the Marine Fabricatorbut also on the MFA website and in future MFA marketing material.

The goal of the awards is to promote awareness of the marine fabrics used in marine products and applications ranging in size and type.

The Fabrication Excellence Awards is a competition sponsored by MFA, a division of the Industrial Fabrics Association International, a not-for-profit trade association whose over 1,500-member companies represent the international specialty fabrics and technical textiles marketplace.

58' Bayliner Pilothouse Bridge - Canvas Enclosure by Chicago Marine Canvas — 58′ Bayliner Pilothouse Bridge

August 17, 2018December 4, 2023

Dingy Cover For Galeon 560 Skydeck

This 2017 Galeon 560 Yacht needed a new dingy cover.

Here at Chicago Marine Canvas we specialize in custom covers therefore, none of our covers are the same. They are all different to ensure that each one fits the boat in need properly. We also use many labor-saving tools that help us do things quickly. This saves you money at the end of the day on the perfect cover.

The first step to our process is to head out to your boat to take measurements with our 3D measuring device. After we gather precise measurements we head back to the shop to start our design process on the computer. We do all of our design work using CAD (Computer-Aided-Design) Software. Because we are working on the computer we can see exactly what we are creating in 3D. This allows us to create the perfect fitting cover for your boat. After the cover is designed, we draw it out using our plotter. This draws out all the pieces of the pattern perfectly so our seamstress can sew it up!

This dingy cover was created out of Stamoid. Stamoid is a great material to make a boat cover out of. It is water, UV, and stain resistant. We used SolarFix thread in clear to sew this all together. Solarfix is a PTF thread which is also, UV, chemical, and mildew resistant. Which means, that you’d never have to bring your new dingy cover in for restitching after it’s been out in the sun for a few summers! Finally, on the bottom of the cover we did a draw cord. As a result, the cover can tighten around the dingy keeping the cover nice and secure, and your boat dry!

August 17, 2018December 4, 2023

Sailboat: Dodger, Helm Cover, Winch Covers, Sail Cover

For this sailboat we created a custom dodger, helm cover, winch covers and sail cover.

Here at Chicago Marine Canvas, everything we do is custom. We use many cost-effective, labor-saving tools that help us speed up the process, therefore you save some money. This also helps us make sure that your cover will fit perfectly when it comes to install time!

The first thing we do to begin our process is journey out to your boat. Once we get there we use our 3D measuring device to take precise pinpoint measurements. After we gather all of those, we head back to our shop where our designer gets to work. We use CAD (Computer-Aided-Design) Software during our design process. On the computer we can see the thing we can see the design in 3D.

Making sure everything matched in color, we used Sunbrella fabric in the color toast. Sunbrella is one of our favorite marine fabrics to use when it comes to canvas, it comes with 10 year warranty. For all the things we sewed up for this job, we used SolarFix thread in clear, which has a lifetime guarantee. This means, no more restitching after your new canvas has been out in the sun for a few years! This thread will outlast the canvas it self!

We made sure to add leather reinforcement patches on the forward and aft areas of the dodger where there would be high amounts of friction on the sailboat. For the windows of this dodger we used Strataglass. Strataglass is the only vinyl on the market that offers a 2 year warranty if it is properly maintained and cleaned.

For this sailboat we also made matching winch covers out of sunbrella fabric as well as a matching helm cover!

July 5, 2018December 4, 2023

Custom Quad Sunpads

This SeaRay Sedan Bridge 390 had lots of deck space so we went a head and designed four custom sunpads to fit the bow of the boat.

Here at Chicago Marine Canvas, everything we do is custom! So we can make anything you have in mind when it comes to design and functionality. Did your last sunpad get taken away by the Chicago winds!? We can make sure your new sunpad is securely attached to your boat so you wont have to worry about it being gone when you come back to your boat! Is your sunpad looking drab? We have access to lots of fun patterns that can make your boat look chic out on the water this year.

The first step to our process is going out to your boat to take measurements. Here at Chicago Marine Canvas we use a lot of labor-saving, cost-effective tools. Our 3D measuring device is one of those tools! We quickly measure your boat and then head back to the shop to start our design process. We do all of our design work on the computer using CAD (Computer-Aided-Design) software. Once we finish that up, we send everything over to our plotter, another one of our cost-effective, labor-saving tools. Our plotter draws out the pattern of your new sunpads perfectly!

For these sunpads we used Sunbrella upholstery fabric in the pattern Adaptation Stone! We can make sunpads out of any material you’d prefer, but we recommend using Sunbrellla upholstery fabric because it’s softer on your skin, easy to clean in a washing machine, and has many different designs and colors available! Sunbrella upholstery fabric comes with a 5 year warranty. For thread we used Solar Fix which is a PTFE or a Polytetrafluoroethylene type of thread, which is also known as teflon, that is guaranteed for life! That means you can say goodbye to repairs that involve restitching. This thread doesn’t get eaten by the sunlight, salt water, or other outside elements.

We used DriFast foam for these sunpads. Drifast foam is a firm open celled foam that is very porous. It allows water to run through it easily, instead of absorbing it like other closed cell foams. It even keeps you cool when you are on it due to the open cells of the foam allowing air to move freely through the foam. This foam is antimicrobial which helps prevent microorganism growth which happens in wet areas.

October 12, 2017December 4, 2023

Rinker Fiesta Vee 270

To protect the interior of your boat, it is important to have a waterproof cover. Here at Chicago Marine Canvas we do custom covers for every boat, because every boat is different and we want your cover to fit tight so there is no room for water leaks when a rain storm comes. This is a Rinker Fiesta Vee 270 and we fabricated a custom cover for it this summer.

We start off our process by going out on site to the boat to take measurements. Here at Chicago Marine Canvas we have a lot of cost-effective, labor-saving tools that help cut your covers cost down while making sure it is the perfect fit! For measuring we use a portable 3d measuring device. After we gather all the measurements needed we head back to the shop to start the design process. For this cover our designer made sure to make cut outs for all the framing on this boat, leaving it up to our seamstress to make individual boots for each pole, along with velcro straps to assure the cover isn’t going anywhere in these Chicago winds. After we do all of our design work we head over to our plotter which draws out all of the pieces of your cover we just finished up. This is another one of our labor-saving tools. Our plotter can quickly draw out all of our patterned pieces for your new cover, instead of us having to do it all by hand! After everything is drawn out, we hand it all over to our seamstress so she can begin her process. She starts off by cutting everything out and then looking at the pattern to figure out the best way to sew everything together. After that, she organizes all the pieces and gets to work.

For this cover we used Sunbrella fabric in the color doubonette tweed. We love using Sunbrella fabric! It is fade resistant and has a 10 year warranty! To sew everything together we used GORE tenara thread in black. GORE tenara is another favorite product of ours. It is UV, salt water, chemical and extreme weather resistant! It has a lifetime guarantee, which means, all of your seams will outlast your canvas! We also installed a Boat Vent II in the middle of this cover so that all water that hits it, runs off!

We used DOT snaps in burgundy to blend into this cover, as well as stay puts all along the back.

October 10, 2017December 4, 2023

70′ Hatteras

Visiting Chicago from Florida for the summer. This 70′ Hatteras lost its bimini somewhere from Traverse City to Chicago. We got to create a custom bimini for this boat to help bring the shade back into these boaters lives!

Our first step when we get a job is going on site to take measurements. We bring our 3d measuring device which is labor-saving and cost-effective. It saves us time measuring which saves you money at the end of the day on your new custom cover. After we gather all of our measurements we need and take lots of detailed photos we head back to the shop. We do all of our design work on the computer so we can physically see what we are creating, as well as be super accurate. This helps save us trips when we go to fit the new cover onto your boat. After we do all the design work we then bring it over to our plotter. This is another one of our tools that is labor-saving. Instead of us hand drawing out all of our designs, our plotter does it for us, quickly and efficiently. Then we hand all of our plotted fabric over to our seamstress, who cuts everything out and then starts the fabrication process.

For this 70′ Hatteras bimini cover we used Stamoid fabric in white. Stamoid is UV, water, and fold resistant. It’s very easy to clean with just water! Check out this video to see Stamoids performance testing videos! To sew this up we used GORE tenara thread in clear. GORE tenara UV, saltwater, chemical, and extreme weather resistant. It is backed by a lifetime guarantee. We used lenzip zippers which also have a lifetime guarantee.

We installed this cover on the day the Cubs won the world series! Go Cubs GO!

October 10, 2017December 4, 2023

Mediterranean Mainship

This 1989 open Mediterranean Mainship was in need of some protection from the rain, so we created it a cockpit cover using some of our favorite products.

We start out all of our projects by going on site to the boat. We bring out our special 3d device to take measurements. Our 3d measuring device is cost-effective and labor-saving. It saves us time taking measurements which in the end saves you money on your new cover! After we gather our measurements we need we head back to the shop. We upload all of our measurements we gathered and start working on the design process. We do all of our design work on the computer, creating a 3d design so we can see what the end product will look like. This way we can make sure to make any adjustments, or special needs that your cover may need on there instead of making multiple trips out to your boat. In this case we knew where all the poles for the framing of this boat were located, so during the design process we made sure to include them. After we finish the design process, we bring the design to our plotter, which is also a labor-saving, cost-effective tool we use here at Chicago Marine Canvas. It helps us save time by drawing out the patterned pieces of your new cover quickly, instead of us having to do it by hand. Then we hand everything over to our seamstress, who cuts out all the pieces and starts sewing them together.

For this Mediterranean Mainship we used Sunbrella canvas in black along with black Sunbrella binding. Sunbrella canvas is one of our favorite products to use to create a new boat canvas for our clientele. It is fade resistant and has a 10 year warranty. To sew everything together we used GORE tenara thread which is UV, chemical, saltwater and extreme weather resistant. It has a lifetime guarantee and is great for outdoor applications. This thread will outlast your canvas. Our designer made sure to include all the locations of where the framing poles were, so we could make boots that wrapped around each pole, helping prevent water leakage from getting to the interior of this boat. We created custom boots and flaps using Sunbrella and velcro so that the cover would be nice and secure onto the boat. We attached the cover using DOT snaps in black, attaching from the top of the windshield to the back of the boat. We also used Boat Vent II to help with water runoff as well as ventilation in the boat. while your cover is up.

September 19, 2017December 4, 2023

Sundancer Full Enclosure

This Sundancer 300 was in need of a new full enclosure.

We always begin our process by going out to the boat with our team to take measurements. We use a 3d measuring device that is quick and efficient, which saves us time and you money at the end of the day. After we take the measurements, we head back to the shop to start the design process. We do all of our design work on the computer, making sure to custom tailor your new cover so that it fits perfectly. Once we finish up the design work, we have our plotter draw out all of the patterned pieces for this enclosure. Then we hand it over to our seamstress so they can get to work.

For this project we used Sunbrella in black, GORE tenara thread in black, and Sunbrella binding in black. GORE tenara thread has a lifetime warranty which means no more sun eaten seams. We also used Lenzip zippers in black which also have a life time guarantee.

For the front windows we used Makrolon which is a semi-rigid polycarbonate. The great thing about Makrolon is that it doesn’t sag like other vinyls. It also doesn’t expand or contract in different temperatures that way your cover always look brand new. With Makrolon your new enclosure looks like an extension off of your windshield, making your new cover looking super clean and chic.

The aft windows on this boat are Strataglass. We used large pieces of glass for maximum visibility. Strataglass is now the only vinyl on the market that comes with a 2 year warranty after install.

We also created large canvas panels in the aft area of the boat, on the port and star side to help with shade while out on the water.

Tag: boating